50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.Product Description Hunter Flow-Sync SCH80 Sensor Receptacle Tee The Flow-Sync is a simple and economical solution for metering and reacting to actual flow conditions. A proven water saver, the Hunter Flow Sync (HFS) connects to the ACC and I-Core controllers to measure actual flow, and provides automatic reaction to high or low flow conditions during irrigation. The Flow-Sync is designed for use on pipe sizes up to 4 inches. When installed in conjunction with a master valve, the HFS can be a key source in preventing water waste resulting from line breakage. Flow-Clik Diameter Operating range (L/min) Minimum Suggested Maximum* 1″ (25mm) 7.6 64 1.5″ (40mm) 19 132 2″ (50mm) 37.8 208 3″ (75mm) 106 454 4″ (100mm) 129 738 Simple two wire connection to ACC and I-Core controllers (up to 1000 ft/300 m) Feeds flow data (gallons or litres) to controller, for flow recording and monitoring purposes Robust waterproof construction (used with appropriate FCT tees for pipe diameter, see table) Provides station level flow monitoring for reaction to high or low flow conditions Prevents damage and waste from leaks and breaks in piping system Notes: * Good design practice dictates the maximum flow not to exceed 1.5m/sec. Suggested maximum flow is based upon Class 200 IPS plastic pipe The Tee requires Barrel Nipple out of the Sensor Tee (2 in Total) Tee Only – Flow-clik sold separately Click for Product Brochure
